A comparative study of the mechanical behaviour of thermally oxidized commercially pure titanium and zirconium

Date

2017-06-10

Advisors

Journal Title

Journal ISSN

ISSN

Volume Title

Publisher

Elsevier

Type

Article

Peer reviewed

Yes

Abstract

The objective of this study is to compare the mechanical behaviour of thermally oxidised commercially pure titanium (CP-Ti) and commercially pure zirconium (CP-Zr). For this purpose, these two bio-metals were thermally oxidised under the same condition (650 °C for 6 h) and the oxidised specimens were characterised using various analytical and experimental techniques, including oxygen uptake analysis, layer thickness and hardness measurements, scratch tests, dry sliding friction and wear tests and tribocorrosion tests in Ringer’s solution. The results show that under the present thermal oxidation condition, 4 times more oxygen is introduced into CP-Zr than into CP-Ti and the oxide layer produced on CP-Zr is nearly 6 times thicker than that on CP-Ti. Thermally oxidised CP-Zr possesses a higher hardness, a deeper hardening depth and better scratch resistance than thermally oxidised CP-Ti. Under dry sliding and tribocorrosion conditions, thermally oxidised CP-Zr also possesses much better resistance to material removal and a higher load bearing capacity than thermally oxidised CP-Ti. Thus, thermally oxidised Zr possesses much better mechanical behaviour than thermally oxidised Ti.

Description

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.

Keywords

titanium, zirconium, oxidation, wear, tribocorrosion

Citation

Alansari, A. and Sun, Y. (2017) A comparative study of the mechanical behaviour of thermally oxidized commercially pure titanium and zirconium. Journal of the Mechanical Behavior of Biomedical Materials, 74, pp. 221-231

Rights

Research Institute

Institute of Engineering Sciences (IES)