Analysis of Applying Ultrasonic Frequency on a Desktop FDM Nozzle

Date

2014-09-20

Advisors

Journal Title

Journal ISSN

ISSN

DOI

Volume Title

Publisher

International Conference on Design and Concurrent Engineering 2014

Type

Conference

Peer reviewed

Yes

Abstract

Fused deposition modeling (FDM) is an Additive Manufacturing (AM) process that has an economical advantage compared to other AM processes. However, its biggest drawback is that it requires post processing to achieve a good surface finish. Ultrasound has been applied in various conventional machining processes and produce good surface finish. However, the application of ultrasound to AM has not been sufficiently explored. This research aim to investigate the application of using ultrasound technology for a desktop FDM system. The idea is to transmit high vibration from the ultrasonic transducer to the FDM system's nozzle and the objective is to examine whether the nozzle is able to withstand the high vibration being transmitted. A Computer-Aided Design (CAD) software used to develop the 3D model of the extrusion nozzle component and a Computer-Aided Engineering (CAE) software was used to perform static and vibration analysis. A frequency range of 20kHz to 30kHz and 30kHz to 40kHz was applied to the nozzle and it was found that the nozzle was able to withstand frequencies up to 40 kHz of vibration. In addition, the lowest Factor of Safety (FoS) obtained was 18.8975, concluding that the nozzle of FDM can withstand the high vibration transmitted from the ultrasonic transducer.

Description

Keywords

Fused deposition modelling, Ultrasonic, Factor of Safety

Citation

Maidin, S., Abdul Aziz, K. F., Muhamad, M.K. and E. Pei (2014) Analysis of Applying Ultrasonic Frequency on a Desktop FDM Nozzle. In: International Conference on Design and Concurrent Engineering 2014 (iDECON 2014) - Emerging Technologies Towards Sustainable Manufacturing. 22-23 September 2014, Melaka, Malaysia.

Rights

Research Institute