Show simple item record

dc.contributor.authorTan, Xincai Catoen
dc.date.accessioned2012-08-20T08:36:11Z
dc.date.available2012-08-20T08:36:11Z
dc.date.issued2011-04
dc.identifier.citationTan, X. (2011) Evaluation of Friction in Upsetting. Production Engineering - Research and Development, 5, (2), pp. 141-149en
dc.identifier.issn0944-6524
dc.identifier.urihttp://hdl.handle.net/2086/6847
dc.description.abstractDistributions of contact stresses at the neutral point in metal forming are very hard to be properly predicted due to the complex interface situation and lack of suitable friction models. In this paper, the dynamic friction model in which the friction depends on both time rate of strain and normal pressure has been applied to predict contact stresses in cylinder upsetting. Case studies have shown that the predicted results agreed with the experimental data chosen from literature. By comparing with two other friction models, the dynamic friction model seemed to give a better solution.en
dc.language.isoenen
dc.publisherSpringeren
dc.subjectContact stressesen
dc.subjectfriction modelen
dc.subjectmetal formingen
dc.subjectplastic deformationen
dc.titleEvaluation of Friction in Upsettingen
dc.typeArticleen
dc.identifier.doihttp://dx.doi.org/10.1007/s11740-010-0287-5
dc.researchgroupDIGITSen


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record