Browsing School of Engineering and Sustainable Development by Title
Now showing items 481-500 of 1946
-
e-Information on wires- A First Step towards 2-Terminal Silicon Nanowires for Electronic Memory Devices
(Article)Presently, there is a rapid growth of interest in the area of flexible electronics. Benefits such as light weight, durability and low-cost are among the most appealing aspects. However, the high temperatures throughout the ... -
An E-Recipe for Student Support
(Conference) -
Edutainment in E-learning interfaces.
(Conference) -
Effect of Applied Cathodic Potential on Friction and Wear Behavior of CoCrMo Alloy in NaCl Solution
(Article)Most of the reported work on the effect of applied potential on tribocorrosion or corrosive wear of metallic alloys in a corrosive environment were conducted at anodic potentials. Limited tests have been conducted at ... -
The effect of asphalt mixture gradation and compaction energy on aggregate degradation
(Article)This paper investigates the influence of asphalt mixture type (aggregate gradation) and compaction energy level on the degradation of aggregate during laboratory compaction. The most severe form of laboratory compaction ... -
Effect of breakdown on the flow processing systems.
(Conference) -
Effect of Cavity Vacuum Pressure Diminution on Thermal Performance of Triple Vacuum Glazing
(Article)Long-term durability of the vacuum edge seal plays a significant part in retrofitting triple vacuum glazing (TVG) to existing buildings in achieving progress towards a zero-energy building (ZEB) target. Vacuum pressure ... -
Effect of Condensate Flow Rate on Retention Angle on Horizontal Low-Finned Tubes
(Article)The paper reports experimental results using simulated condensation on eight horizontal integral finned tubes with different fin spacing but same root diameter. Condensation was simulated with low approaching zero vapor ... -
Effect of Control Constraints on Active Stabilization of Flutter Instability
(Conference)The effect of amplitude and rate control constraints in active flutter suppression was analysed for a number of different linear and nonlinear control laws considering mathematical model of two degree-of freedom aeroelastic ... -
Effect of DC self-bias on the adhesion of diamond-like carbon deposited on metal tracks by RF-PECVD
(Article)The adhesion and material properties of diamond-like carbon (DLC), deposited by the radio-frequency plasma enhanced chemical vapour deposition technique, can be significantly affected by the substrate material on which the ... -
Effect of electrochemical potential on tribocorrosion behavior of low temperature plasma carburized 316L stainless steel in 1 M H2SO4 solution.
(Article)Low temperature plasma carburizing is a surface engineering technique developed for austenitic stainless steels to achieve combined improvements in tribological and corrosion resistant properties. However, very little ... -
Effect of layer thickness on the rolling-sliding wear behavior of low-temperature plasma-carburized austenitic stainless steel.
(Article)Dry rolling-sliding wear tests have been carried out in the present work to investigate the tribological behavior of the novel surface engineered layers produced on AISI 316 austenitic stainless steel by the low-temperature, ... -
Effect of oxidation time on the tribological behavior of thermally oxidized commercially pure zirconium under dry sliding conditions
(Article)Thermal oxidation is an effective surface engineering technique to harden the surfaces of zirconium (Zr) and its alloys for improvement in friction and wear performance. In the present investigation, commercially pure ...